yum install iscsi-initiator-utils
echo "InitiatorName-`iscsi-iname -p iqn.2010-05.net.too2`"  >   /etc/iscsi/initiatorname.iscsi
service iscsi start
iscsiadm -m discovery -t sendtargets -p 172.16.1.100  #sendtargets 可写成st
#ls /var/lib/iscsi/send_targets/
#ls /var/lib/iscsi/send_targets/172.16.100.100,3260/
iscsiadm -m node -T iqn.2010-03.net.too2:teststore.disk1 -p 172.16.1.100 -l
#fdisk -l

客户端加认证密码： 
vim /etc/iscsi/iscsid.conf
node.session.auth.authmethod = CHAP
node.session.auth.username = too2
node.session.auth.password = mypasswd

有任何疑问请点击留言: 留言板
本文发布于http://wiki.too2.net,转载请联系本人。